ff

roles/configure/tasks/main.yaml

@@ -79,16 +79,43 @@
   set_fact:
     nmcli_failed: "{{ nmcli_result.rc != 0 }}"
 
+- name: Run nmcli to check if Ethernet  connection has already been added
+  shell: /usr/bin/nmcli c | grep 'Ethernet'
+  register: nmcli_result_eth
+  ignore_errors: True
+
+- name: Check result nmcli eth
+  set_fact:
+    nmcli_eth_failed: "{{ nmcli_result_eth.rc != 0 }}"
+
+- name: Run nmcli to check if Ethernet  connection has already been added
+  shell: /usr/bin/nmcli c | grep 'LTE'
+  register: nmcli_result_lte
+  ignore_errors: True
+
+- name: Check result nmcli lte
+  set_fact:
+    nmcli_lte_failed: "{{ nmcli_result_lte.rc != 0 }}"
+
+- name: Run nmcli to check if bridge  connection has already been added
+  shell: /usr/bin/nmcli c | grep 'bridge'
+  register: nmcli_result_bridge
+  ignore_errors: True
+
+- name: Check result nmcli lte
+  set_fact:
+    nmcli_bridge_failed: "{{ nmcli_result_bridge.rc != 0 }}"
 
 
 - name: Run nmcli to add a connection LTE
   command: /usr/bin/nmcli c add autoconnect yes save yes con-name {{ LTE_con_name }} ifname cdc-wdm0 type gsm apn "internet"
   tags: br
+  when: nmcli_lte_failed
 
 - name: Configure bridge
   command: /usr/bin/nmcli c add type bridge ifname br0 autoconnect yes save yes con-name bridge stp no ipv6.method disabled ipv4.method manual ipv4.addr 10.1.10.1/24
   tags: br
-
+  when: nmcli_bridge_failed
 # - name: Configure bridge1
 #   command: /usr/bin/nmcli c add type ethernet slave-type bridge  con-name 'Ethernet' ifname {{ int_name }} master br0
 #   loop:  
@@ -102,26 +129,35 @@
   - enp90s0
   loop_control:
     loop_var: int_name
+  when: nmcli_eth_failed
+
 # - name: set ip for bridge
 #   command: /usr/bin/nmcli c mod bridge ipv4.addr {{ wifi_int_ip }}/24 ipv4.method manual 
 #   tags: br
 
 - name: Run nmcli to add a connection with the specified parameters as a wifi access point if above check has failed
-  command: /usr/bin/nmcli c add ipv4.method shared autoconnect yes save yes con-name {{ wifi_ssid }} ifname {{ wifi_int.stdout }} type wifi slave-type bridge master br0 wifi.ssid {{ wifi_ssid }} wifi.mode ap wifi-sec.proto rsn wifi-sec.pairwise ccmp wifi-sec.psk {{ wifi_psk }} wifi-sec.key-mgmt wpa-psk
+  command: /usr/bin/nmcli c add  autoconnect yes save yes con-name {{ wifi_ssid }} ifname {{ wifi_int.stdout }} type wifi slave-type bridge master br0
   when: nmcli_failed
+
 - name: Run nmcli to add WPA-PSK security to the wifi connection
   command: /usr/bin/nmcli c mod {{ wifi_ssid }} \
-    802-11-wireless.band bg
-
+    802-11-wireless.band bg \
+    wifi.ssid {{ wifi_ssid }} \
+    wifi.mode ap \
+    wifi-sec.proto rsn \
+    wifi-sec.pairwise ccmp \
+    wifi-sec.psk {{ wifi_psk }} \
+    wifi-sec.key-mgmt wpa-psk \
+    ipv4.method shared
 # - name: Run nmcli to add WPA-PSK security to the wifi connection
 #   command: /usr/bin/nmcli c mod {{ wifi_ssid }} \
 #     802-11-wireless.band bg \
-#     802-11-wireless.channel 1 \
 #     802-11-wireless-security.key-mgmt wpa-psk \
 #     802-11-wireless-security.proto rsn \
 #     802-11-wireless-security.group ccmp \
 #     802-11-wireless-security.pairwise ccmp \
 #     802-11-wireless-security.psk {{ wifi_psk }} \
+
 - name: set ip for bridge
   command: /usr/bin/nmcli c up bridge
   tags: br